Series MBV-L
Thermoplastic [PVC, CPVC, Polypropylene, or PVDF (Kynar)] manual ball valve with PTFE seats preloaded with [EPDM or Viton] O-rings and [1/2" through 4", socket or threaded] end connectors that are machined flat on the side that seals against an O-ring. The valve is to have a trunnion ball design with the ball being spherically machined to assure it is not out of round and polished to a smooth finish. Dual O-ring seals and a PTFE thrust bearing will be installed on the large diameter solid actuating shaft. The valve will have mounting lugs on the outer body. Lockout tab out designed to accept most OSHA approved locks/shackles. Available as complete valve assembly or as kit for field retrofit. Lockout upper and lower hasps fabricated from corrosion resistant thermoplastic. Self-tapping screw/fastener provided firmly secures the upper hasp, into the MBV shaft to secure the assembly. All units are to be 100% individually tested at the factory. As manufactured by Plast-O-Matic Valves, Inc., Cedar Grove, NJ.