Series TMBV
Thermoplastic [PVC or CPVC] manual 3-way ball valve with PTFE seats preloaded with [EPDM or FKM] O-rings and [ 1/2" through 4", socket or threaded or Sch 80 flanged] end connectors that are machined flat on the side that the seals against an o-ring. The ball inside the valve is to be spherically machined to assure it is not out of round and polished to a smooth finish. A two (2) hole ball is standard with 180 uni-directional rotation. To prevent a momentary no-flow (dead-heading) condition during cycling, a three (3) holed ball is available (add -A to end of part number). Dual o-ring seals and a PTFE thrust bearing will be installed on the large diameter solid actuating shaft. The valve will have mounting lugs on the outer body. All units are to be 100% individually tested at the factory. As manufactured by Plast-O-Matic Valves, Inc., Cedar Grove, NJ.