Thermoplastic [PTFE or PVDF (Kynar)] pressure regulator, [ 1/4" through 2"] 5-100 PSI set range with connections for [Asahi BCF, GF BCF, Flare-type, or NPT] piping system. Valve to have a one piece body housing containing the inlet port, outlet port, valve seat, and pressure sensing orifice. Regulator is to have a piston with a TFM rolling diaphragm sensing the downstream pressure and providing for maximum sensitivity and control accuracy. Valve is a non shut-off design with no elastomers and no metal components aside from a non-wetted, PVDF coated spring. All components are to receive pre-assembly DI cleaning. All units are to be [pre-set to ____PSI,] 100% individually tested at the factory, followed by 8 hour hot/8 hour cold DI rinse, and final multi-stage cleaning with DI water and Triton X100 @ 1%, 18 megohm DI rinse, nitrogen purge, blacklight inspection, and double bagging in 6 mil heat-sealed polyethylene. As manufactured by Plast-O-Matic Valves, Inc., Cedar Grove, NJ USA.

OPTIONAL SPEC FOR LOWER COST OPTION (ABS NON-WETTED COMPONENTS):

Thermoplastic [PTFE or PVDF (Kynar)] pressure regulator, [ 1/2" through 2 1/2"] with connections for [Asahi BCF, GF BCF, Flare-type, or NPT] piping system. Valve to have a one piece body housing containing the inlet port, outlet port, valve seat, and pressure sensing orifice. Regulator is to have a piston with a TFM rolling diaphragm sensing the downstream pressure and providing for maximum sensitivity and control accuracy. Valve is a non shut-off design with no elastomers and no metal components aside from a non-wetted, PVDF coated spring. Non-wetted upper housing components to be manufactured in ABS. All wetted components are to receive pre-assembly DI cleaning. All units are to be [pre-set to ____PSI,] 100% individually tested at the factory, followed by 8 hour hot/8 hour cold DI rinse, and final multi-stage cleaning with DI water and Triton X100 @ 1%, 18 megohm DI rinse, nitrogen purge, blacklight inspection, and double bagging in 6 mil heat-sealed polyethylene. As manufactured by Plast-O-Matic Valves, Inc., Cedar Grove, NJ USA.