Compact, Self-Closing Vacuum Breakers
Series VB/VBM/VBS

Compact, Self-Closing Vacuum Breakers Protect Tanks and Piping Systems Against Hazards, Damage and Financial Losses Caused by Vacuum

Features/Benefits with Proper Installation:

• Designed to protect enclosed tanks from collapse or structural damage during draining.
• Eliminates siphoning of dangerous fluids.
• Prevents vacuum which can cause damage to sensitive instruments and filters.
• Normally-closed design prevents fugitive emissions from leaving system.
• Ensures against replacement of damaged expensive equipment and avoids critical system downtime.
• Patented diaphragm design assures dependable, repetitive, bubble-tight sealing in VBM and VB; PFA encapsulated spring and special poppet provide identical performance in VBS design.
• For corrosive or ultra-pure liquid applications.
• Sizes: ½", ¾", 1", 1½", 2", 3" and 4".
• Materials: PVC, CPVC, Polypro, PVDF, PTFE.

Series VBM ½", ¾" & 1" • Construction & Materials

Series VBM Vacuum Breakers are molded of Geon® type 1, grade 1, PVC(Polyvinyl Chloride), Corzan® CPVC, Glass-filled Polypropylene and Kynar® PVDF in pipe connection sizes ½", ¾" and 1".

A machined version, Series VB is available in PTFE in sizes ¾" and 1".

Diaphragms are of EPDM or FKM (Viton). Fasteners are not used on Series VBM. Fasteners used on PTFE Series VB are stainless steel and are NOT in contact with process liquid.

For alternate materials, please consult factory. Minimum quantities apply.

Threaded connections are standard on all models. Socket ends, BSP threads, JIS and DIN connections are available on all sizes and materials except PTFE VB. Outlet connection is shipped with standard dust cap. Cap is removable for applications where pipe connection is desired due to location, potential hazard, etc. The outlet connection is identical to the connection on the system side of the valve. If your application requires an unusual connection, custom material or configuration, please contact our Technical Team at 973-256-3000.

Series VBS 1½" & 2" • Construction & Materials

VBS Vacuum Breakers are available in Geon® PVC, Natural Polypropylene, Corzan® CPVC and Kynar® PVDF in sizes 1½" and 2". Standard dust caps match body material with the exception of PVDF models which are natural polypropylene; PVDF dust cap is optional. No fasteners are used on Series VBS in 1½" & 2" sizes. The self-guided spring is completely encapsulated (not coated) with PFA. The encapsulation is not "adehered" to the spring. It flexes independently of the spring and does not crack or flake the way coatings can. This encapsulation has been tested for over 1,000,000 cycles in laboratory conditions with no ill effects.

Series VBS seals are EPDM or FKM.

For alternate materials, please consult factory. Minimum quantities apply.

Threaded connections are standard on all models. Socket ends, BSP threads, JIS and DIN connections are available on all sizes and materials. Outlet connection is shipped with standard dust cap. Cap is removable for applications where pipe connection is desired due to location, potential hazard, etc. The outlet connection is identical to the connection on the system side of the valve. In these two sizes the VBS connections are removable and the valve is easy to clean and service. If your application requires an unusual connection, custom material or configuration, please contact our Technical Team at 973-256-3000.

Series VBS 3" & 4" • Construction & Materials

VBS Vacuum Breakers are available in Geon® PVC, Natural Polypropylene, Corzan® CPVC and Kynar® PVDF in sizes 3" and 4". Standard dust caps match body material with the exception of PVDF models which are natural polypropylene; PVDF dust cap is optional. External, non-wetted fasteners are used on Series VBS in 3" & 4" sizes and are 300 series stainless steel. The self-guided spring is completely encapsulated (not coated) with PFA. The encapsulation is not "adehered" to the spring. It flexes independently of the spring and does not crack or flake the way coatings can. This encapsulation has been tested for over 1,000,000 cycles in laboratory conditions with no ill effects.

Series VBS seals are EPDM or FKM.

For alternate materials, please consult factory. Minimum quantities apply.

Threaded connections are standard on all models. Socket ends, BSP threads, JIS and DIN connections are available on all sizes and materials. Outlet connection is shipped with standard dust cap. Cap is removable for applications where pipe connection is desired due to location, potential hazard, etc. The outlet connection is identical to the connection on the system side of the valve. If your application requires an unusual connection, custom material or configuration, please contact our Technical Team at 973-256-3000.

Connection Types:

Threaded connections are standard on all models. U.S. socket end connectors are available on all sizes and materials except PTFE VB. BSP, JIS, and metric DIN connections also available on VBM & VBS. Outlet connection is shipped with standard dust cap. Cap is removable for applications where pipe connection is desired due to location, potential hazard, etc. The outlet connection is identical to the connection on the system side of the valve. If your application requires an unusual connection, custom material or configuration, please contact our Technical Team at 973-256-3000.

Design:

Operation and Installation:

Uses of Vacuum Breakers in a Typical Piping System

In the diagram above, a vacuum breaker is positioned on top of the supply tank to prevent implosion when the tank is drained. A second vacuum breaker is shown on a tee to prevent siphon in a vertical drop. This creates a pocket of air in the riser, lateral line, and drop to "break" the suction that would otherwise be created in the drop when the pump is turned off. The blue color indicates liquid in the system when the pump is turned off. When the system is re-started, an air release valve positioned along the high point of the pipeline is necessary to expel the air pocket for safe and efficient operation. Additional air release valves may be necessary at other points, depending upon the size and complexity of the pipeline. Placement of degassing valves (not shown) varies from system to system.

Performance:

These Vacuum Breakers will begin to break a vacuum at approximately 2 inches of mercury (1.0 PSI or 0,07 Bar negative pressure). Therefore the user must assure that the tank can withstand much more vacuum. This information must be obtained from the manufacturer of the tank. It is strongly advised to use a minimum 3X safety factor. The chart below shows air flow (SCFM) through the valve, vs. vacuum (inches of Hg) at the outlet of the valve, with atmospheric pressure at the inlet of the valve. These are calculated values, thus the need to apply a safety factor is important. The user of the valve must assure that the air flow through the valve will be enough to compensate for tank vacuum. Tank vacuum is a function of tank size, and rate at which liquid is flowing out of the tank.

Anti-Siphon Applications:

For these applications the Vacuum Breakers must be installed in a "U-bend" at least 30 inches (2½ feet or 76 cm) above the highest liquid level. Depending on the safety factor desired for Anti-Siphoning this height would become 60 inches (5 feet or 152 cm) at 2 times safety factor which is recommended by Plast-O-Matic.

Use Caution in Dangerous Applications:

In the event a diaphragm failure could cause spraying of a dangerous liquid onto nearby equipment or personnel, or simply into the atmosphere where breathing the vapors would be dangerous, it is strongly advised to use a Plast-O-Matic Check Valve in lieu of the Vacuum Breaker, and pipe the vent or inlet side of the check valve to a safe remote location. The Check Valve will have the same flow capabilities of the Vacuum Breaker, and contains the same design.

Elimination of Vacuum in a System:

To prevent instrument or system malfunction, the same considerations are involved as in the tank application. The vacuum breaker should be installed at the highest location in the system. Plast-O-Matic Vacuum Breakers can be mounted in any position since they are self-sealing and do not rely on gravity to operate; however, upright is preferred. Also see Anti-Siphon section.

Dimensions:

Ordering Information:

Pressure/Temperature Ratings:

For complete pressure & temperature ratings (including CPVC) please click here for .pdf version of data sheet.

CAD Files

HELPFUL LINKS: